Chroma 63610-80-20 Operation & Programming Manual page 173

CONFigure:PARAllel:INITial
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF, ON
Query Example:
CONFigure:PARAllel:MODE
Type:
Description:
Setting Syntax:
Setting Parameters: <CRD | NR1>, NONE(0), MASTER(1), SLAVE(2)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, NONE, MASTER, SLAVE [Unit = None]
Query Example:
CONFigure:SOUNd
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF, ON
Query Example:
CONFigure: SYNChronous:MODE
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, NONE(0), MASTER(1), SLAVE(2)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, NONE, MASTER, SLAVE
Query Example:
CONFigure:VOLTage:LATCh
Type:
Description:
Setting Syntax:
Setting Parameters:<CRD | NR1>, OFF(0),ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, OFF, ON
All Channel
Set Load into/exit parallel mode.
CONFigure:PARAllel:INITial<space><CRD | NR1>
CONF:PARA:INIT ON
CONF:PARA:INIT 0
CONFigure:PARAllel:INITial?
CONF:PARA:INIT?
Channel-Specific
Set the parallel mode.
CONFigure:PARAllel:MODE<space><CRD | NR1>
CONF:PARA:MODE MASTER
CONF:PARA:MODE 0
CONFigure:PARAllel:MODE?
CONF:PARA:MODE?
Channel-Specific
Set the buzzer on/off in Load.
CONFigure:SOUNd<space><CRD | NR1>
CONF:SOUN OFF Set buzzer to OFF.
CONF:SOUN 1
CONFigure:SOUNd?
CONF:SOUN?
Channel-Specific
Set the synchronization mode.
CONFigure: SYNChronous:MODE<space><CRD | NR1>
CONF:SYNC:MODE MASTER
CONF:SYNC:MODE 0
CONFigure: SYNChronous:MODE?
CONF:SYNC:MODE?
Channel-Specific
Set the action type of Von.
CONFigure:VOLTage:LATCh<space><CRD | NR1>
CONF:VOLT:LATC OFF
CONF:VOLT:LATC 1
CONFigure:VOLTage:LATCh?
Set Load to into parallel mode.
Set Load to exit parallel mode.
[Unit = None]
Set parallel mode to MASTER.
Set parallel mode to NONE.
Set buzzer to ON.
[Unit = None]
Set sync. mode to MASTER.
Set sync. mode to NONE.
[Unit = None]
Set Von latch function to OFF.
Set Von latch function to ON.
[Unit = None]
Remote Operation
5-41