Chroma 63610-80-20 Operation & Programming Manual page 189

DIGitizing:TRIGger:POINt
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 1 ~ 15,000, Resolution = 1, Unit = None
Setting Example:
Query Syntax:
Return Parameters:<NR1>, [Unit = None]
Query Example:
DIGitizing:TRIGger:SOURce
Type:
Description:
Setting Syntax
Setting Parameters:<CRD | NR1>, LOADON(0), LOADOFF(1), TTL(2), BUS(3) |
Setting Example:
Query Syntax:
Return Parameters:<CRD>, LOADON, LOADOFF, TTL, BUS, MANUAL
Query Example:
DIGitizing:WAVeform:CAPture?
Type:
Description:
Setting Syntax:
Setting Parameters:None
Setting Example:
Query Syntax:
Return Parameters:<CRD>, WAIT, OK, ERROR [Unit = None]
Query Example:
DIGitizing:WAVeform:DATA?
Type:
Description:
#508192<byte1><byte2><byte3><byte4><byte5><byte6><byte7><byte8>...
Setting Syntax:
Channel-Specific
Set the trigger points for digitizing function.
DIGitizing:TRIGger:POINt<space><NRf+>
DIG:TRIG:POIN 500
DIG:TRIG:POIN MAX
DIG:TRIG:POIN MIN
DIGitizing:TRIGger:POINt?[<space><MAX | MIN>]
DIG:TRIG:POIN?
DIG:TRIG:POIN? MAX
DIG:TRIG:POIN? MIN
Channel-Specific
Set the trigger source for digitizing function.
DIGitizing:TRIGger:SOURce<space><CRD | NR1>
MANUAL(4) [Unit = None]
DIG:TRIG:SOUR TTL
DIG:TRIG:SOUR 3
DIGitizing:TRIGger:SOURce?
DIG:TRIG:SOUR?
Channel-Specific
Start waveform data transmit from Module to Frame.
None
None
DIGitizing:WAVeform:CAPture?
DIG:WAV:CAP?
Channel-Specific
This query returns voltage or current waveform data from the DC
Electronic Load in binary format. The waveform either voltage or
current are consist of number points correspond to sampling points
that user specified in format of 32bits float point.
Low byte ―――→ High byte
Point #1
None
Set trigger points = 500
Set trigger points = maximum value.
Set trigger points = minimum value.
Set trigger source to TTL.
Set trigger source to BUS.
Point #2
Remote Operation
5-57