Chroma 63610-80-20 Operation & Programming Manual page 188

Programmable DC Electronic Load 63600 Series Operation & Programming Manual
DIGitizing:INITiate
Type:
Description:
Setting Syntax
Setting Parameters: None
Setting Example:
Query Syntax:
Return Parameters:None
Query Example:
DIGitizing:SAMPling:POINt
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 1 ~ 15,000, Resolution = 1, Unit = None
Setting Example:
Query Syntax:
Return Parameters:<NR1>, [Unit = None]
Query Example:
DIGitizing:SAMPling:TIME
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 2μs ~ 40ms, Resolution = 2μs, Unit = Second
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Second]
Query Example:
DIGitizing:TRIGger[:STATe]
Type:
Description:
Setting Syntax
Setting Parameters: <CRD | NR1>, OFF(0), ON(1)
Setting Example:
Query Syntax:
Return Parameters:<CRD>, IDLE, PRE_TRIG, WAIT_TRIG, POST_TRIG
Query Example:
5-56
Channel-Specific
Start the digitizing function to wait trigger signal.
DIGitizing:INITiate
DIG:INIT
None
None
Channel-Specific
Set the sampling points for digitizing function.
DIGitizing:SAMPling:POINt<space><NRf+>
DIG:SAMP:POIN 500
DIG:SAMP:POIN MAX
DIG:SAMP:POIN MIN
DIGitizing:SAMPling:POINt?[<space><MAX | MIN>]
DIG:SAMP:POIN?
DIG:SAMP:POIN? MAX
DIG:SAMP:POIN? MIN
Channel-Specific
Set the sampling time for digitizing function.
DIGitizing:SAMPling:TIME<space><NRf+>[suffix]
DIG:SAMP:TIME 0.02
DIG:SAMP:TIME 20ms
DIG:SAMP:TIME MAX
DIG:SAMP:TIME MIN
DIGitizing:SAMPling:TIME?[<space><MAX | MIN>]
DIG:SAMP:TIME?
DIG:SAMP:TIME? MAX
DIG:SAMP:TIME? MIN
Channel-Specific
Set the software trigger for digitizing function.
DIGitizing:TRIGger[:STATe]<space><CRD | NR1>
DIG:TRIG ON
DIG:TRIG 0
DIGitizing:TRIGger[:STATe]?
DIG:TRIG?
Initial digitizing function.
Set sampling points = 500
Set sampling points = maximum
value.
Set sampling points = minimum
value.
Set sampling time = 20ms
Set sampling time = 20ms
Set sampling time = maximum
value.
Set sampling time = minimum
value.
[Unit = None]
Set trigger state to ON.
Set trigger state to OFF.