Chroma 63610-80-20 Operation & Programming Manual page 182

Programmable DC Electronic Load 63600 Series Operation & Programming Manual
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = A/μs]
Query Example:
CURRent:DYNamic:T1
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 10μs ~ 100s, Resolution = 10μs, Unit = Second
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Second]
Query Example:
CURRent:DYNamic:T2
Type:
Description:
Setting Syntax:
Setting Parameters:<NRf+>, 10μs ~ 100s, Resolution = 10μs, Unit = Second
Setting Example:
Query Syntax:
Return Parameters:<NR2>, [Unit = Second]
Query Example:
CURRent:STATic:FALL
Type:
Description:
Setting Syntax:
Setting Parameters:Refer to respective specification for valid value range.
Setting Example:
5-50
CURR:DYN:RISE 2.5
CURR:DYN:RISE 1A/μs
CURR:DYN:RISE MAX
CURR:DYN:RISE MIN
CURRent:DYNamic:RISE?[<space><MAX | MIN>]
CURR:DYN:RISE?
CURR:DYN:RISE? MAX
CURR:DYN:RISE? MIN
Channel-Specific
Set duration parameter T1 for constant current dynamic mode.
CURRent:DYNamic:T1<space><NRf+>[suffix]
CURR:DYN:T1 10ms
CURR:DYN:T1 2
CURR:DYN:T1 MAX
CURR:DYN:T1 MIN
CURRent:DYNamic:T1?[<space><MAX | MIN>]
CURR:DYN:T1?
CURR:DYN:T1? MAX
CURR:DYN:T1? MIN
Channel-Specific
Set duration parameter T2 for constant current dynamic mode.
CURRent:DYNamic:T2<space><NRf+>[suffix]
CURR:DYN:T2 10ms
CURR:DYN:T2 2
CURR:DYN:T2 MAX
CURR:DYN:T2 MIN
CURRent:DYNamic:T2?[<space><MAX | MIN>]
CURR:DYN:T2?
CURR:DYN:T2? MAX
CURR:DYN:T2? MIN
Channel-Specific
Set the falling slew rate of current for constant current static mode.
CURRent:STATic:FALL<space><NRf+>[suffix]
CURR:STAT:FALL 2.5
CURR:STAT:FALL 1A/μs
CURR:STAT:FALL MAX
Set rising slew rate to 2.5A/μs.
Set rising slew rate to 1A/μs.
Set rising slew rate to the maximum
value of dynamic load.
Set rising slew rate to the minimum
value of dynamic load.
Set the dynamic duration T1 = 10ms.
Set the dynamic duration T1 = 2s.
Set the dynamic duration T1 as
maximum value.
Set the dynamic duration T1 as
minimum value.
Set the dynamic duration T2 = 10ms.
Set the dynamic duration T2 = 2s.
Set the dynamic duration T2 as
maximum value.
Set the dynamic duration T2 as
minimum value.
Set falling slew rate to 2.5A/μs.
Set falling slew rate to 1A/μs.
Set falling slew rate to the