System Subsystem - Chroma 63610-80-20 Operation & Programming Manual

Programmable DC Electronic Load 63600 Series Operation & Programming Manual

5.3.2.21 SYSTEM Subsystem

SYSTem:ERRor?
Type:
Description:
Setting Syntax:
Setting Parameters: None
Query Syntax:
Return Parameters: <ACCRD>,
Query Example:
SYSTem:REMote
Type:
Description:
Setting Syntax:
Setting Parameters: None
Setting Example:
SYSTem:LOCal
Type:
Description:
Setting Syntax:
Setting Parameters: None
Setting Example:
M
Type:
Description:
Setting Syntax:
Setting Parameters: <NR1>, 0: do not change, 1: CCL, 2: CCM, 3: CCH, 4: CRL, 5:
Example:
AC
Type:
Description:
5-92
All Channels
This command queries the error string of the command parser.
None
SYSTem:ERRor?.
0,"No Error",
1,Data Format Error",
2,Data Range Error",
3,Command Error",
4,Execution Error",
5,Too Many Errors"
SYST:ERR?
All Channels
This command can only be used under control of USB and Ethernet.
If SYST:REM is programmed, the 63600 will be set in the REMOTE
state, and the front panel of frame will be disabled except the
<LOCAL>key pressed.
SYSTem:REMote
SYST:REM
All Channels
This command can only be used under control of USB and Ethernet.
If SYST:LOC is programmed, the 63600 will be set in the LOCAL
state, and the front panel will work.
SYSTem:LOCal
SYST:LOC
All Channels
Set the load mode to the ten channels in one frame. The frame will
ignore the setting if the channel does not exist.
M<space>"n,n,n,n,n,n,n,n,n,n"
CRM, 6: CRH, 7: CVL, 8: CVM, 9: CVH, 10: CPL, 11: CPM, 12:
CPH, 13: CZL, 14: CZM, 15: CZH, 16: CCDL, 17: CCDM, 18: CCDH,
19: CCFSL, 20: CCFSM, 21: CCFSH, 22: TIML, 23: TIMM, 24:
TIMH, 25: SWDL, 26: SWDM, 27: SWDH, 28: OCPL, 29: OCPM, 30:
OCPH, 31: PROG, 34: MPPTL, 35: MPPTM, 36: MPPTH, 37:
UDWL, 38: UDWM, 39: UDWH
M "1,1,2,2,2,2,5,5,0,0"
M "2,2,2,2,2,2"
All Channels
Set the current level 1(L1) of CC mode to the ten channels in one
frame. The frame will ignore the setting if the channel does not exist.