Attach Transom Boards - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 49: Attach Transom Boards
A: Tight to 1 Transom Assembly and flush to the bottom of (390) Mid Roof Support attach 1 (490) Transom
Board A to (390) Mid Roof Support and (480) Long Roof End with 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 49.1
and 49.2)
B: Tight to (490) Transom Board A and flush to the bottom of (390) Mid Roof Support attach 1 (491) Transom
Board B to (390) Mid Roof Support and (480) Long Roof End with 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 49.1
and 49.2)
C: Repeat Steps A and B for the other side.
Transom
Assembly
480
Tight
Fig. 49.2
480
490
Wood Parts
2 x Transom Board A 1 x 5 x 14-1/2"
490
2 x Transom Board B 1 x 5 x 10"
491
390
390
491
S20
x 4 per board
Hardware
16 x #8 x 1-3/8" Wood Screw
S20
100
Fig. 49.1
491
Flush
Transom
Assembly
480
Tight
480
490