Tnr Brace Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 28: TNR Brace Assembly
A: Attach (281) TNR Upright to (280) TNR Ground Brace with 1 (H8) 1/4 x 4-1/4" Hex Bolt (with lock
washer, flat washer and t-nut) in the top hole. Make sure both boards are square then attach with 1 (S11)
#8 x 2" Wood Screw. (fig. 28.1)
Wood Parts
1 x TNR Ground Brace 1-1/4 x 3 x 32-1/4"
280
1 x TNR Upright 1-1/4 x 3 x 20-1/4"
281
Fig. 28.1
280
H8
S11
Hardware
1 x #8 x 2" Wood Screw
S11
1 x 1/4 x 4-1/4" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H8
1/4" Lock
Washer
1/4" Flat
Washer
73
281
1/4"
T-Nut