Attach Large Roof Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 50: Attach Large Roof Assembly
A: With 2 people on the ground and at least 1 person in the fort, lift the Large Roof Assembly up and over the
Back side of the fort. Guide the Roof Assembly onto the fort so all four (340) Roof Supports sit flush to the front
and outside edges of (410) Swing Top and each (480) Long Roof End. The Gable Dormer Assembly is at the
Front. (fig. 50.1 and 50.2)
B: Attach (340) Roof Supports to (410) Swing Top and each (480) Long Roof End with 1 (S3) #8 x 2-1/2" Wood
Screw per support. (fig. 50.1 and 50.2)
340
340
Fig. 50.1
340
S3
S3
410
S3
Front Wall
480
480
340
Fig. 50.2
S3
480
Flush
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
101