Attach Slide To Fort - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 54: Attach Slide to Fort
Note: Pre-drill all holes using a 1/8" drill bit before installing the pan screws.
A: Place Slide centred in the opening of the (051) Front Wall Panel. Slide must be tight to the outside of (051)
Front Wall Panel. (fig. 54.1)
B: Attach slide to fort using 3 (S7) #12 x 2" Pan Screws. (fig. 54.1)
Fig. 54.1
S7
051
Warning!
Must be tight to
(051) Front Wall Panel on both sides
Warning!
Must be tight to
Slide
(051) Front Wall Panel on both sides
Warning!
Check entire play
center for bolts protruding beyond
T-Nuts. Use extra washers to
eliminate this condition.
Hardware Other Parts
3 x #12 x 2" Pan Screw 1 x Slide
S7
105