Attach Floor Boards - KidKraft Appleton Play System F24148 Installation And Operating Instructions Manual

Step 15: Attach Floor Boards
A: Install 1 (1774) CE Gap Board to each end of the assembly attaching to (1761) Side Joist, (1763) Floor Joist
and (1764) Front Floor using 5 (S2) #8 x 1-1/2" Wood Screws per board. Make sure boards are tight to each
(1759) SW Floor, (1762) Floor Back and each (1771) Post. (fig. 15.1)
B: In between both (1774) CE Gap Boards place 5 (A5) Floor Boards making sure all boards are evenly spaced.
Attach to (1761) Side Joist, (1763) Floor Joist and (1764) Front Floor using 5 (S2) #8 x 1-1/2" Wood Screws per
board. All boards should be tight to (1762) Floor Back. (fig. 15.2)
C: Tight to (1751) Centre Divider and flush to top of (1775) Floor Board attach (1766) Corner Block to (1764)
Floor Front with 2 (S3) #8 x 2-1/2" Wood Screws. (fig. 15.2 & 15.3)
Fig. 15.1
1759
Fig. 15.3
1751
x 2
S3
1766
Wood Parts
5 x Floor Board 1 x 6 x 23-1/2"
1775
2 x CE Gap Board 1 x 6 x 23-1/2"
1774
1 x Corner Block 2 x 3 x 4-1/2"
1766
x 5 per board
S2
1774
1764
S2
x 5 per board
35 x
2 x
1762
1761
1763
1771
1764
1762
1775
1775
S3
Hardware
S2 #8 x 1-1/2" Wood Screw
S3
#8 x 2-1/2" Wood Screw
29
1771
(2783) Tarp Upright
removed for clarity
1759
1774
Fig. 15.2
1751
1775
1775
1775
1766
1764