KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 81

Step 35: Large Roof Assembly
Part 2
C: Place 1 Roof Support Assembly against one side so the peaks meet and the ends of the roof supports are
flush with the ends of the roof panels. Attach with 8 (S11) #8 x 2" Wood Screws. (fig. 35.4)
D: Attach the second Roof Support Assembly on the opposite side, peaks to meet and ends are flush with 8
(S11) #8 x 2" Wood Screws. (fig. 35.4)
Fig. 35.4
Roof Support
Assembly
Flush
351
Flush
Roof Support
Assembly
16 x
S11
S11
Hardware
#8 x 2" Wood Screw
S11
81
Flush
350
Flush