KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 40

Step 12: Door Panel Assembly
Part 2
C: On the outside of the (120) Door Window Panel attach the second Door Handle at approximately the same
place as the one on the inside. Use 2 (S37) #7 x 5/8" Pan Screws. (fig. 12.3)
D: Attach 2 Door Hinges on the outside of the (120) Door Window Panel on the opposite side from the Door
Handle. Judge spacing based on fig. 12.3. Use 3 (S37) #7 x 5/8" Pan Screws per Hinge.
Note: Hinge stops must be tight to (120) Door Window Panel. (fig. 12.4)
Fig. 12.3
Door
Handle
S37
Outside View
120
S37
Hardware
8 x
S37
Fig. 12.4
Top View
#7 x 5/8" Pan Screw
40
1/2"
Hinge Stop
Other Parts
1 x Door Handle
2 x Door Hinge