Attach Gap And Floor Boards - KidKraft WINDALE Installation And Operating Instructions Manual

Step 13: Attach Gap and Floor Boards
Floor Boards
A: Place 1 (2207) Cedar Gap Board at each end of the assembly. Then starting on the Swing Wall side place
2 (2206) Cedar Floor Boards, 1 (2208) Centre Gap Board so the gap in the board fits around the (2213) Front
Divider, and 2 more (2206) Cedar Floor Boards. Make sure all boards are evenly spaced. (fig. 13.1)
B: Attach all boards to (1761) Side Joist, (1903) Floor Joist and both (2218) Short Joists with 5 (S2) #8 x 1-1/2"
Wood Screws per board. (fig. 13.1)
Fig. 13.1
(Hidden under boards)
(Hidden under boards)
Wood Parts
2 x Cedar Gap Board 1 x 6 x 35-3/4"
2207
1 x Centre Gap Board 1 x 6 x 35-3/4"
2208
4 x Cedar Floor Board 1 x 6 x 35-3/4"
2206
2207
1903
S2
x 35
1761
35 x
2206
2213
2206
Hardware
#8 x 1-1/2" Wood Screw
S2
29
2208
2218
(Hidden under boards)
2207
Swing Wall