Large Roof Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 35: Large Roof Assembly
Part 1
A: Place (350) Front Roof Panel against (351) Back Roof Panel so the tops form a peak then tight to the inside
edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S0) #8 x 7/8" Truss Screws per bracket.
(fig. 35.1 and 35.2)
B: Attach the third Narrow Angle Bracket centred on the middle slat with 2 (S0) #8 x 7/8" Truss Screws. (fig.
35.1 and 35.3)
Narrow Angle
Bracket
Fig. 35.2
Flush
S0
Wood Parts
1 x Front Roof Panel 1-1/4 x 32-1/2 x 45"
350
1 x Back Roof Panel 1-1/4 x 32-1/4 x 45"
351
Fig. 35.1
x 2 per
bracket
351
Flush
Hardware
6 x #8 x 7/8" Truss Screw
S0
80
Fig. 35.3
Narrow Angle
Bracket
Flush
350
Other Parts
3 x Narrow Angle Bracket
Centred
S0