KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 45

Step 13: Front Wall Assembly
Part 3
D: Place (134) Bell Top on top of (136) Bell Support so the angled and back edges are flush then attach with 3
(S20) #8 x 1-3/8" Wood Screws. Repeat by attaching (135) Bell Top RT to top of (136) Bell Support. Rounded
ends of (134) Bell Top and (135) Bell Top RT are at the bottom. (fig. 13.6 and 13.7)
E: Centred above the door on (042) Narrow Front Panel place each Bell Support Assembly so they are tight and
form a peak then attach to (042) Narrow Front Panel with 1 (S3) #8 x 2-1/2" Wood Screw and 1 (S11) #8 x 2"
Wood Screw per assembly. (fig. 13.8)
Fig. 13.6
Top View
042
Fig. 13.8
Wood Parts
1 x Bell Top 5/8 x 3-3/8 x 11-1/4"
134
1 x Bell Top RT 5/8 x 3-3/8 x 11-1/4"
135
2 x Bell Support 1-1/2 x 1-1/2 x 10-5/8"
136
S20
134
S3
S11
S3
Hardware
2 x #8 x 2" Wood Screw
S11
6 x #8 x 1-3/8" Wood Screw
S20
2 x #8 x 2-1/2" Wood Screw
S3
45
Front of assembly
Back of assembly
(next to fort)
Fig. 13.7
Flush
136
S20
135