KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 37

Step 10: Attach Access Ladder/Rockwall Assembly
Part 3
C: Place (100) RW-AL Ground Brace flush to the end and bottom of (024) Rock Rail. Make sure the other end
of the board is flush to the bottom of (050) SW Wall Panel then attach to (024) Rock Rail with 2 (S11) #8 x 2"
Wood Screws. (fig. 10.5 and 10.6)
D: Attach other end of (100) RW-AL Ground Brace to (050) SW Wall Panel with 2 (S11) #8 x 2" Wood Screws
and 1 (S4) #8 x 3" Wood Screw. (fig. 10.5 and 10.6)
Fig. 10.6
S11
Flush
Wood Parts
1 x RW-AL Ground Brace 5/4 x 4 x 27-3/4"
100
050
S4
100
Fig. 10.5
024
050
S11
Hardware
1 x #8 x 3" Wood Screw
S4
4 x #8 x 2" Wood Screw
S11
37
100
Flush
024