Crowsnest Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 21: Crowsnest Assembly
Part 1
A: Attach 1 (210) Crowsnest Bottom Side flush to the inside edge of the panel posts on (040) Slide End
Panel and tight to the top of the floor support on (040) Slide End Panel using 3 (S11) #8 x 2" Wood Screws
per side. Notice pilot holes towards bottom of boards. (fig. 21.1)
Fig. 21.1
Wood Parts
2 x Crowsnest Bottom Side 3/4 x 5-1/4 x 14-3/4"
210
Flush
210
Flush
Floor
Support
x 3 per
S11
board
Hardware
6 x #8 x 2" Wood Screw
S11
58
040
210
Notice holes
at bottom of
boards