KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 29

Step 6: Join Swing and Slide Wall Assemblies
Part 4
G: On the inside of the assembly attach (041) Narrow Back Panel to (052) Back Wall Panel using 2 Flat Panel
Brackets in the places shown with 4 (S8) #12 x 3/4" Pan Screws per bracket. (fig. 6.8 and 6.9)
H: Repeat Step G to attach (042) Narrow Front Panel to (051) Front Wall Panel. (fig. 6.8 and 6.9)
I: At all four corners on the bottom and the two corners shown on top attach 1 Panel Corner Bracket with 4 (S8)
#12 x 3/4" Pan Screws per bracket. Brackets to be flush to the top and bottom of the panels. (fig. 6.8 and 6.10)
Fig. 6.8
Fig. 6.9
Inside View
041
042
Front Wall
Flat Panel
Bracket
x 2 per wall
S8
x 4 per
bracket
051
Fig. 6.10
Inside View
Hardware
40 x #12 x 3/4" Pan Screw
S8
29
Back Wall 052
S8
x 4 per
bracket
Panel
Corner
Flush
Bracket
x 2 per wall
Other Parts
4 x Flat Panel Bracket
6 x Panel Corner Bracket