KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 94

Step 44: Attach Transom Assembly
Part 2
D: Attach the top of each MOD 5 Pane Window to each (400) TB Support with 1 (S0) #8 x 7/8" Truss Screw per
window then attach bottom of windows to (051) Front Wall Panel and (052) Back Wall Panel with 2 (S0) #8 x 7/8"
Truss Screws per window . (fig. 44.3 and 44.4)
E: Attach the outside upright of each Transom Assembly to (062) Wall Tie with 1 Corner Bracket per upright
using 3 (S0) #8 x 7/8" Truss Screws per bracket. Corner Bracket to be centred on uprights. (fig. 44.3 and 44.5)
MOD 5 Pane Window
S0
x 3 per bracket
400
Fig. 44.3
Fig. 44.5
Right or Left
Upright
Corner
Bracket
MOD 5 Pane
Window
062
S0
x 3 per
window
Front or Back
Wall Panel
062
Hardware
18 x #8 x 7/8" Truss Screw
S0
94
MOD 5 Pane Window
Fig. 44.4
400
Other Parts
2 x Corner Bracket