Transom Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 40: Transom Assembly
Part 1
A: With the notches facing down tap 3 1/4" T-nuts into (400) TB Support then fit (401) Right Upright, (402) Left
Upright and (403) Centre Upright into the grooves so the ends and tops are flush. Attach with 3 (H9) 1/4 x 1-1/4"
Hex Bolts (with lock washer and flat washer). (fig. 40.1)
Fig. 40.1
1/4" T-Nut
Flush
401
Wood Parts
2 x TB Support 1-1/4 x 2-1/2 x 44-1/4"
400
2 x 401 Right Upright 1-1/4 x 3 x 16-1/2"
2 x 402 Left Upright 1-1/4 x 4-1/4 x 16-1/2"
2 x Centre Upright 1-1/4 x 3 x 16-1/2"
403
400
H9
6 x
1/4" T-Nut
H9
402
Hardware
1/4 x 1-1/4" Hex Bolt
H9
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
88
1/4" T-Nut
H9
403
Flush
1/4" Flat
Washer
1/4" Lock
Washer