Attach Small Roof Assembly - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 47: Attach Small Roof Assembly
Part 1
A: With 2 people on the ground and at least 1 person in the fort, lift Small Roof Assembly up and over the Back
side of the fort. Guide the Small Roof Assembly onto the fort so the ends of the Small Roof Support Assembly sit
flush to the front and ends of each (460) Roof End Short. The ends of the Mid Roof Support Assembly should be
flush to the ends of the (450) Mid Roof Ends and tight to the Transom Assemblies. (fig. 47.1 and 47.2)
B: Attach Small Roof Assembly to (450) Mid Roof Ends first then (460) Roof End Shorts with 1 (S3) #8 x 2-1/2"
Wood Screw per corner. (fig. 47.2)
Fig. 47.1
Flush
Tight
S3
Flush
450
S3
460
Small Roof
Support
Assembly
Transom
Mid Roof
Assembly
Support
Assembly
460
Flush
Hardware
4 x #8 x 2-1/2" Wood Screw
S3
97
Fig. 47.2
Transom
Assembly
Tight
Flush
450
S3
S3