KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 28

Step 6: Join Swing and Slide Wall Assemblies
Part 3
E: From inside the assembly, place 1 (062) Tie centred between (041) Narrow Back Panel and (052) Back Wall
Panel so it is flush to the tops of the panels and the angled ends face out then attach with 2 (H10) 1/4 x 2-1/4"
Hex Bolts (with lock washer, flat washer and t-nut) and 2 (S11) #8 x 2" Wood Screws. (fig. 6.6 and 6.7)
F: Repeat Step E to attach 1 (062) Tie to (042) Narrow Front Panel and (051) Front Wall Panel. (fig. 6.6 and
6.7)
Back Wall
Fig. 6.6
041
Wood Parts
2 x Tie 1 x 3 x 24-1/2"
062
Front Wall
1/4" T-Nut
062
H10
4 x
4 x
1/4" Lock
Washer
1/4" Flat
Washer
H10
S11
042
Hardware
1/4 x 2-1/4" Hex Bolt
H10
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
#8 x 2" Wood Screw
S11
28
052
Fig. 6.7
Inside View
051
062
Flush