KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual page 87

Step 39: Small Roof Assembly
Part 3
D: Place Small Roof Support Assembly against opposite side of the Small Roof Assembly so the peaks meet
and the ends of the roof supports are flush with the ends of the roof panels. Attach with 6 (S11) #8 x 2" Wood
Screws. (fig. 39.5)
E: Turn the assembly over then attach 1 MOD 3 Pane Gable to the inside of the (341) Roof Support Smalls with
4 (S0) #8 x 7/8" Truss Screws. (fig. 39.6)
Fig. 39.5
Flush
S11
Small Roof
Assembly
6 x
S11
4 x
S0
Small Roof
Support
Assembly
MOD 3 Pane Gable
341
Hardware
#8 x 2" Wood Screw
#8 x 7/8" Truss Screw
87
Flush
Fig. 39.6
S0
Other Parts
1 x MOD 3 Pane Gable
341