Attach Long Roof Ends - KidKraft Cedar Summit Canyon Ridge Installation And Operating Instructions Manual

Step 48: Attach Long Roof Ends
A: Place 1 (480) Long Roof End tight to each (390) Mid Roof Support and flush to the top of the Transom
Assembly. Make sure (480) Long Roof End is level and the overhang at each end measures 4-1/4", then attach
to (390) Mid Roof Supports with 1 (S3) #8 x 2-1/2" Wood Screw and 1 (S4) #8 x 3" Wood Screw per support and
to each Transom Assembly using 2 (S3) #8 x 2-1/2" Wood Screws per assembly. (fig. 48.1 and 48.2)
Transom
Assembly
4-1/4"
Overhang
480
390
Fig. 48.2
Wood Parts
2 x Long Roof End 1-1/4 x 3 x 16-3/8"
480
390
Fig. 48.1
390
S3
Tight
Hardware
6 x #8 x 2-1/2" Wood Screw
S3
2 x #8 x 3" Wood Screw
S4
99
Transom
Assembly
480
S4
Flush
S3
Transom
Assembly
480