Table of Contents
Advertisement
Step 3: Rockwall Assembly
Part 1
A: Place (031) Access Board flush to the top of the Access Ladder/Rockwall Assembly and (030) Access Rock
Bottom at the bottom of the assembly as shown in fig. 3.1. Then place (032) Board Rock A and (033) Board Rock
B as shown in fig. 3.1. Do not screw boards down yet. Rock holes are to be staggered so they do not form a
straight line and are at the top of the boards. Note: Rock Boards are to be flush to (020) Left Access and pilot
holes are centred over (024) Rock Rail. (fig. 3.1)
B: Make sure all boards are tight together and the assembly is square, then attach all boards except for (031)
Access Board using 4 (S20) #8 x 1-3/8" Wood Screws per board. (031) Access Board to be attached in Step 10,
Part 2, keep aside until needed. (fig. 3.1)
Do not attach yet,
031
put aside until
Step 10
032
Flush
S20
x 4 per
board
Wood Parts
1 x
Access Rock Bottom 1 x 6 x 22-1/8"
030
1 x
Access Board 1 x 5 x 22-1/8"
031
4 x
Board Rock A 1 x 6 x 22-1/8"
032
5 x
Board Rock B 1 x 6 x 22-1/8"
033
033
033
032
IMPORTANT!
Follow hole
pattern
40 x
Fig. 3.1
032
033
032
Hardware
#8 x 1-3/8" Wood Screw
S20
22
033
033
024
020
030
Hide quick links:
Advertisement
Table of Contents
