»» Security/Authentication
Write security: 1; Read security: 2
The method used for authenticating the PPP peer is selected here. The
possible values are:
None (def)
No attempt is made to authenticate the PPP peer.
The Express L768 will act as a RADIUS client and
Radius
authenticate the PPP peer using the RADIUS serv-
er. The Radius server parameters must be set up
properly for this to work.
PPP Profile The PPP profile is used to authenticate the PPP
peer.
See Configuration/PPP Profile on page 3-46 for more information on au-
thenticating.
»» Security/Radius Server
The parameters for the radius server are configured in this menu. The
RADIUS server can be used for authenticating a PPP peer (if defined
under Security/Authentication) and for Telnet server sessions.
Radius Server/Primary Server
Write security: 1; Read security: 2
This is the IP address of the first RADIUS server that the Express L768
should attempt to communicate with when authenticating a PPP peer.
Radius Server/Secondary Server
Write security: 1; Read security: 2
This is the IP address of the back-up RADIUS server that the Express
L768 should attempt to communicate with when the primary server
does not respond.
61203192L1-20
Chapter 3. Terminal Menu Operation and Structure
Express L768 User Manual
3-29