Install Upper And Lower Jambs - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 11: Install Upper and Lower Jambs
A: In the upper opening of (2622) End Panel Assembly place 1 (2602) Upper Jamb so it measures 17" to the
inside of each post then attach with 2 Jamb Mounts using 4 (S0) #8 x 7/8" Truss Screws per mount. (fig. 11.1,
11.3, 11.4 and 11.5)
B: In the lower opening of (2622) End Panel Assembly and the front (2618) Front Back Panel place 1 (2601)
Lower Jamb so it measures 17" to the inside of each post then attach each (2601) Lower Jamb with 2 Jamb
Mounts using 4 (S0) #8 x 7/8" Truss Screws per mount. (fig. 11.2, 11.3, 11.4 and 11.5).
Fig. 11.1
Outside View
Notice
orientation
of this
17"
bracket.
Used in this
variation
only.
2602
This variation
for TNR III Tube
Slide installation
location only
Fig. 11.5
Grooves
to the
inside
Wood Parts
1 x Upper Jamb 1-1/4 x 3 x 35-15/16"
2602
2 x Lower Jamb 1-1/4 x 3 x 41-15/16"
2601
Fig. 11.3
S0
2622
Fig. 11.4
S0
x 4 per
Jamb
Mount
2602
2622
2601
24 x
Jamb
Mount
x 4 per
Jamb
Centred
Mount
Jamb
Mount
Centred
Front
Hardware
#8 x 7/8" Truss Screw
S0
43
Fig. 11.2
Outside View
Do not cover holes
with Jamb Mount
2618
and
2622
17"
2601
2618
2601
Other Parts
6 x Jamb Mount
17"