Help Topics; Information; Calibrating; Screen Recorder - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

9.3 Help topics

User interface, general
Assembly / operating manuals (PDF)
Media library

9.4 Information

9.5 Calibrating

9.6 Screen recorder

9.7 Pool control (attractions)

9.8 Single pool > Measured values pool
Deletes the list of modules which have been assigned, but no
n
longer exist in the bus.
Deletes the list of modules which are assigned in the bus. A
n
new assignment is needed.
You will find the values available for replacing the factory setting
Ä Chapter 13 'Factory settings of device' on page 94
here:
Here you will find explanations of the functions and concepts of the
various operating elements, also refer to chapter
'Operating concept' on page 14
PDFs of the operating instructions of the components installed,
such as pumps, sensors, terminal diagrams etc., are stored here.
You can display the PDFs by tapping on the icon.
Videos are stored here. These videos explain how to calibrate the
sensors of various measured variables.
Here you can display various information about your device, such
as software version, date, system information, identity code, serial
number etc.
For explanations of calibration procedures, see
brating' on page 84
Here you can display the screen recorder of the pool you have
selected. You can read the chronological order of the various
measured values on this screen recorder.
You can display the various pool attractions in this menu. You can
enable or disable these attractions. You can set timers for the
attractions in the submenu, which you reach using the arrow key.
'Single pool' entry takes you to 'Measured values pool'
The
(depiction of all measured variables for the selected pool). Here
you can then read all parameters or configure all parameters
according to your user rights.
Operating the device
Ä Chapter 3
Ä Chapter 11 'Cali‐
79