Intended Use; Warranty Guide; Users' Qualifications - ProMinent Aegis-II Assembly And Operating Instructions Manual

Cooling tower and boiler controller
Hide thumbs Also See for Aegis-II:
Table of Contents

Advertisement

Safety and Responsibility

4.3 Intended Use

The device is intended for measuring and regulating liquid media in industrial and municipal water treatment
applications.
Only use the device in accordance with the technical data and specifications outlined in these operating
instructions and in the operating instructions for the individual components (such as sensors, fittings, calibration
devices, metering pumps, etc.).
Any other uses or modifications may void the ProMinent warranty.
If the equipment supplied is used in a manner not specified in these
instructions, protection provided by the equipment may be impaired.
The pertinent accident prevention regulations, as well as all other generally
acknowledged safety regulations, must be adhered to!

4.4 Warranty Guide

As of this date, the physical controller is warranted for 2 years from the date of purchase as explained in the complete
Prominent warranty. The complete warranty is found in the Prominent catalog Introduction and is available online at
www.prominent.us. Changes to this warranty may not be shown in this manual.
Sensors are typically warranted for 8 months.
The warranty does not apply to goods that become defective for the reason of:
a) Unsuitable or unreasonable use
b) Faulty assembly, installation or servicing by the purchaser or any third party
c) Faulty or careless handling

4.5 Users' Qualifications

Danger of injury to inadequately qualified personnel!
The operator of the plant / device is responsible for ensuring that the
qualifications are fulfilled.
If inadequately qualified personnel work on the unit or loiter in the
hazard zone of the unit, this could result in dangers that could cause
serious injuries and material damage.
All work on the unit should therefore only be conducted by qualified
personnel.
CAUTION!
CAUTION!
WARNING!
Page 16 of 102
CAUTION!
Symbol will be
applied beside each
li
MAINs socket outlet and
identifying that the
maximum total output
current rating on all
relays should not exceed
5A

Advertisement

Table of Contents
loading

Table of Contents