Lenovo Flex System Fabric CN4093 Application Manual page 427

How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs Also See for Flex System Fabric CN4093:
Table of Contents

Advertisement

3. After you configure the IPSec policy, you need to apply it to the interface to enforce 
the security policies on that interface and save it to keep it in place after a reboot. To 
accomplish this, enter:  
© Copyright Lenovo 2017
outbound ESP authenticator key
Note: When configuring a manual policy ESP, the ESP authenticator key is 
optional.
CN 4093(config-ip)# interface ip <IP interface number, 1‐128>
CN 4093(config-ip-if)# address <IPv6 address>
CN 4093(config-ip-if)# ipsec manual-policy <policy index, 1‐10>
CN 4093(config-ip-if)# enable (enable the IP interface)
CN 4093# write (save the current configuration)
The outbound ESP authenticator key code, in 
hexadecimal
Chapter 25: Using IPsec with IPv6
427

Advertisement

Table of Contents
loading

Table of Contents