Flexible Port Mapping In Stacking - Lenovo Flex System Fabric CN4093 Application Manual

Flexible Port Mapping in Stacking

256
CN4093 Application Guide for N/OS 8.4
Flexible Port Mapping allows administrators to manually enable or disable specific
switch ports within the limitations of the installed licenses' bandwidth. For details,
see "Flexible Port Mapping" on page
In stacking, there are no overall bandwidth restrictions. Instead, each switch in the
stack that supports licensing has bandwidth restrictions determined by its license
level.
Commands associated with flexible port mapping can only be run from the master
switch in the stack and can have an additional parameter:
[no] boot port-map <csnum:port number or range>

Adds or removes ports of a stack switch to/from the port map by specifying the
switch's configured number and port number or range of ports. For example:
CN 4093(config)# boot port-map 3:12
Adds port number 12 of stack configured switch number 3 to the port map.
default boot port-map [<csnum>]

Resets the port map configuration to the default settings for the whole stack. If a
configured switch number is specified, the command will reset the port map
configuration only for the selected stack switch.
580.