4. Configure the following on application switch C:
184
CN4093 Application Guide for N/OS 8.4
VLAN 2 is automatically removed from STG 1. By default VLAN 1 remains in
STG 1.
Add port 8 to VLAN 3. Ports 1 and 2 are by default in VLAN 1 assigned to STG 1.
CN 4093(config)# vlan 3
CN 4093(config-vlan)# stg 3
CN 4093(config-vlan)# exit
CN 4093(config)# interface port 8
CN 4093(config-if)# switchport mode trunk
CN 4093(config-if)# exit
If VASA is disabled, enter the following command:
CN 4093(config)# spanning-tree stp 3 vlan 3
VLAN 3 is automatically removed from STG 1. By default VLAN 1 remains in
STG 1.
Switch D does not require any special configuration for multiple Spanning Trees.
Switch D uses default STG 1 only.