Easy Connect Wizard; Configuring The Easy Connect Wizard - Lenovo Flex System Fabric CN4093 Application Manual

Easy Connect Wizard

Configuring the Easy Connect Wizard

42
CN4093 Application Guide for N/OS 8.4
Lenovo EasyConnect (EZC) is a feature designed to simplify switch configuration.
A set of predefined configurations can be applied on the switch via ISCLI. By
launching the EZC Wizard, you are prompted for a minimal set of input and the
tool automatically customizes the switch software.
The EZC Wizard allows you to choose one of the following configuration modes:
Basic System mode supports settings for hostname, static management port IP,

netmask, and gateway.
 Transparent mode collects server and uplink port settings. vNIC groups are
used to define the loop free domains.
Note: You can either accept the static defaults or enter a different port list for
uplink and/or server ports.
 Redundant mode refers to VLAG settings.
The EZC configuration will be applied immediately. Any existing configuration
will be deleted, the current active or running configuration will not be merged or
appended to the EZC configuration.
For any custom settings that are not included in the predefined configuration sets,
the user has to do it manually.
Notes:
 EZC is not available in stacking mode.
 To support scripting, the feature also has a single‐line format. For more
information, please refer to Lenovo Networking ISCLI Reference Guide.
Note: To support scripting, the feature also has a single‐line format. For more
information, please refer to Lenovo Networking ISCLI Reference Guide.
To launch the EZC Wizard, use the following command:
CN 4093# easyconnect
The wizard displays the available predefined configuration modes. You are
prompted to select one of the following options:
CN 4093# easyconnect
Auto configures the switch into a set configuration based on the input
provided.
Current configuration will be overwritten with auto configuration
settings.
The wizard can be canceled anytime by pressing Ctrl+C.
Select which of the following features you want enabled:
#Configure Basic system (yes/no)?
#Configure Transparent mode (yes/no)?