Lenovo Flex System Fabric CN4093 Application Manual page 501
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
© Copyright Lenovo 2017
To remove a PIM neighbor from the accepted list, use the following command.
CN 4093(config-ip-if)# ip pim neighbor-addr <neighbor IPv4 address> deny
CN 4093(config-ip-if)# exit
You can view configured PIM neighbor filters globally or for a specific IP interface
using the following commands:
CN 4093(config)# show ip pim neighbor-filters
CN 4093(config)# show ip pim interface <Interface number> neighbor-filters
Chapter 31: Protocol Independent Multicast
501
Advertisement
Table of Contents
