5. If configuring VLANs, enable or disable VLAN tagging for the port.
6. The system prompts you to configure the next port:
© Copyright Lenovo 2017
If you have selected to configure VLANs back in Part 1, the system prompts:
Port Tagging/Trunk-mode config (Tagged/Trunk-mode port can be a member of
multiple VLANs):
Current Tagging/Trunk-mode support: disabled
Enter new Tagging/Trunk-mode support [d/e]:
Enter d to disable VLAN tagging for the port or enter e to enable VLAN tagging for
the port. To keep the current setting, press <Enter>.
Enter port (INTA1-C14, EXT1-22):
When you are through configuring ports, press <Enter> without specifying any
port. Otherwise, repeat the steps in this section.
65
Chapter 2: Initial Setup