Lacp Individual - Lenovo Flex System Fabric CN4093 Application Manual

LACP individual

© Copyright Lenovo 2017
Use the following command to check whether the ports are aggregated.
CN 4093 # show lacp information
Static LAGs are listed as LAGs 1 though 52. Dynamic LAGs are listed as 65 through
128.
Ports assigned with an LACP admin key are prevented by default from forming
individual links if they cannot join a LACP LAG. To override this behavior, use the
following commands:
CN 4093(config)# interface port <port alias or number>
CN 4093(config-if)# no lacp suspend-individual
This allows the selected ports to be treated as normal link‐up ports, which may
forward data traffic according to STP, Hot Links or other applications, if they do
not receive any LACPDUs.
To configure the LACP individual setting for all the ports in a static LACP LAG,
use the following commands:
CN 4093(config-if)# interface portchannel lacp <LAG admin key>
CN 4093(config-if)# [no] lacp suspend-individual
Note: By default, ports are configured as below:
external ports with lacp suspend-individual

internal ports with no lacp suspend-individual

Chapter 9: Ports and Link Aggregation (LAG)
169