Lenovo Flex System Fabric CN4093 Application Manual page 63

7. Enter the seconds of the current time at the prompt:
8. Turn BOOTP on or off at the prompt:
9. Turn Spanning Tree Protocol on or off at the prompt:
© Copyright Lenovo 2017
Enter seconds [37]:
Enter the seconds as a number from 00 to 59. To keep the current second, press
<Enter>. The system then displays the date and time settings:
System clock set to 8:55:36 Wed Jan 28, 2012.
BootP Option:
Current BOOTP: disabled
Enter new BOOTP [d/e]:
Enter e to enable BOOTP, or enter d to disable BOOTP.
Spanning Tree:
Current Spanning Tree Group 1 setting: ON
Turn Spanning Tree Group 1 OFF? [y/n]
Enter y to turn off Spanning Tree, or enter n to leave Spanning Tree on.
63
Chapter 2: Initial Setup