Enterprise Nos Extensions To Vrrp - Lenovo Flex System Fabric CN4093 Application Manual

How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs Also See for Flex System Fabric CN4093:
Table of Contents

Advertisement

Enterprise NOS Extensions to VRRP

© Copyright Lenovo 2017
This section describes VRRP enhancements that are implemented in Enterprise 
NOS.
Enterprise NOS supports a tracking function that dynamically modifies the 
priority of a VRRP router, based on its current state. The objective of tracking is to 
have, whenever possible, the master bidding processes for various virtual routers 
in a LAN converge on the same switch. Tracking ensures that the selected switch is 
the one that offers optimal network performance. For tracking to have any effect on 
virtual router operation, preemption must be enabled.
Enterprise NOS can track the attributes listed in Table
Table 38.
VRRP Tracking Parameters
Parameter
Number of IP interfaces on the 
switch that are active ("up")
tracking-priority-increment
interfaces
Number of active ports on the same 
VLAN
tracking-priority-increment
ports
Number of virtual routers in master 
mode on the switch
tracking-priority-increment
virtual-routers
Each tracked parameter has a user‐configurable weight associated with it. As the 
count associated with each tracked item increases (or decreases), so does the VRRP 
routerʹs priority, subject to the weighting associated with each tracked item. If the 
priority level of a standby is greater than that of the current master, then the 
standby can assume the role of the master.
See "Configuring the Switch for Tracking" on page
configure the switch for tracking VRRP priority.
38 :  
Description
Helps elect the virtual routers with the 
most available routes as the master. (An IP 
interface is considered active when there 
is at least one active port on the same 
VLAN.) This parameter influences the 
VRRP routerʹs priority in virtual interface 
routers.
Helps elect the virtual routers with the 
most available ports as the master. This 
parameter influences the VRRP routerʹs 
priority in virtual interface routers.
Note: In a hot‐standby configuration, only 
external ports are tracked.
Useful for ensuring that traffic for any 
particular client/server pair is handled by 
the same switch, increasing routing 
efficiency. This parameter influences the 
VRRP routerʹs priority in virtual interface 
routers.
530 for an example on how to 
Chapter 34: Virtual Router Redundancy Protocol
529

Advertisement

Table of Contents
loading

Table of Contents