Lenovo Flex System Fabric CN4093 Application Manual page 567
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
© Copyright Lenovo 2017
Table 40.
Enterprise NOS‐Supported Enterprise SNMP Traps (continued)
Trap Name
altSwAcntLocked
altSwAcntUnlocked
altSwSNMPBlockIPTrap
altSwStgNewRoot
altSwCistNewRoot
altSwStgTopologyChanged
altSwCistTopologyChanged
altSwHotlinksMasterUp
altSwHotlinksMasterDn
altSwHotlinksBackupUp
altSwHotlinksBackupDn
altSwHotlinksNone
altSwStgBlockingState
altSwTeamingCtrlUp
altSwTeamingCtrlDown
altSwTeamingCtrlDownTearDown
Blked
altSwTeamingCtrlError
altSwLACPPortBlocked
Description
Signifies that account has been
locked.
Signifies that account has been
unlocked.
Signifies that SNMP requests are
blocked; trap includes the blocked
IP address.
Signifies that the bridge has become
the new root of the STG.
Signifies that the bridge has become
the new root of the CIST.
Signifies that there was a STG
topology change.
Signifies that there was a CIST
topology change.
Signifies that the Master interface is
active.
Signifies that the Master interface is
not active.
Signifies that the Backup interface
is active.
Signifies that the Backup interface
is not active.
Signifies that there are no active
interfaces.
Signifies port state has changed to
blocking state.
Signifies that the teaming is up.
Signifies that the teaming control is
down.
Signifies that the teaming control is
down but teardown is blocked.
Signifies error, action is undefined.
Signifies that LACP is operationally
down on a port, and traffic is
blocked on the port.
Chapter 36: Simple Network Management Protocol
567
Advertisement
Table of Contents
