Configuring No-Prompt Mode - Lenovo Flex System Fabric CN4093 Application Manual
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
Configuring No-Prompt Mode
© Copyright Lenovo 2017
If you expect to administer the switch using SNSC or another browser‐based
interface, you need to turn off confirmation prompts. When CLI confirmation
prompts are disabled, the switch will choose the default answer. To accomplish
this, use one of the following commands:
CN 4093(config)# [no] prompting
Note: This command will disable CLI confirmation prompts for current and future
sessions.
CN 4093(config)# [no] terminal dont-ask
Note: This command will disable CLI confirmation prompts for the current
session only. It also takes precedence over the prompting command ‐ any settings
configured through the prompting command will be disregarded for the
duration of the current session.
For more details, see the Lenovo Flex System Fabric CN4093 10 Gb Converged Scalable
Switch Command Reference for Enterprise NOS 8.4.
Chapter 1: Switch Administration
57
Advertisement
Table of Contents
