Setting The Failover Limit - Lenovo Flex System Fabric CN4093 Application Manual
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
Setting the Failover Limit
518
CN4093 Application Guide for N/OS 8.4
Figure 59. Two LAGs, one Failover Trigger
Internet
Enterprise
Routing Switch
The failover limit lets you specify the minimum number of operational links
required within each trigger before the trigger initiates a failover event. For
example, if the limit is two, a failover event occurs when the number of operational
links in the trigger is two or fewer. When you set the limit to zero, the switch
triggers a failover event only when no links in the trigger are operational.
Trigger 1
Switch 1
Trigger 1
Switch 2
Server 1
Server 2
Server 3
Server 4
VLAN 1:
VLAN 2:
VLAN Monitor = Off
Advertisement
Table of Contents
