Lenovo Flex System Fabric CN4093 Application Manual page 321

1. Turn CEE on.
2. Configure each allocated priority group with a description (optional), list of 802.1p
priority values, and bandwidth allocation:
3. Configure the strict priority group with a description (optional) and a list of 802.1p
priority values:
4. Save the configuration.
© Copyright Lenovo 2017
This example can be configured using the following commands:
CN 4093(config)# cee enable
Note: Turning CEE on will automatically change some 802.1p QoS and 802.3x
standard flow control settings (see "Turning CEE On or Off" on page
CN 4093(config)# cee global ets priority-group pgid 0 priority 0,1,2
(Select a group for regular LAN, and set for 802.1p priorities 0, 1, and 2)
CN 4093(config)# cee global ets priority-group pgid 0 description
"Regular LAN"
(Set a group description—optional)
CN 4093(config)# cee global ets priority-group pgid 1 priority 3
(Select a group for SAN traffic, and set for 802.1p priority 3)
CN 4093(config)# cee global ets priority-group pgid 1 description "SAN"
(Set a group description—optional)
CN 4093(config)# cee global ets priority-group pgid 2 priority 4
(Select a group for latency traffic and set for 802.1p priority 4)
CN 4093(config)# cee global ets priority-group pgid 2 description
"Biz-Critical LAN"
(Set a group description—optional)
CN 4093(config)# cee global ets priority-group pgid 3 description
"Latency-Sensitive LAN"
(Set a group description—optional)
CN 4093(config)# cee global ets priority-group pgid 3 priority 5,6 pgid 0
bandwidth 10 pgid 1 bandwidth 20 pgid 2 bandwidth 30 pgid 3 bandwidth 40
(Configure link bandwidth restriction)
CN 4093(config)# cee global ets priority-group pgid 15 priority 7
CN 4093(config)# cee global ets priority-group pgid 15 description
"Network Management"
Note: Priority group 15 is permitted unlimited bandwidth. As such, the
commands for priority group 15 do not include bandwidth allocation.
302).
Chapter 17: FCoE and CEE
321