Table of Contents
Advertisement
(3) When the standalone type is used
Q35B
● Module selection example (Q Series)
Product name
Power supply module
CPU module
Main base unit
Extension base unit
I/O module
Output module
Extension cable
24 V DC power supply module
● A0J2 upgrade tool
Product name
Interface module
Base adapter
(for standalone type)
Programmable controller
connection cable
Tip
• When using the stackable type, check that there is enough depth.
Also, check the width when using a programmable controller main/extension base unit with 5 slots because it
may have increased.
• Select the appropriate cable length between the interface module and the programmable controller (I/O
module) depending on the system configuration.
• The I/O addresses (X/Y addresses) of existing A0J2 I/O modules are preset according to the I/O module
numbers. Check the I/O module number that has been set for each existing module.
Connect the A0J2 renewal tool with the I/O modules in a way that the same I/O addresses are used when
upgrading to Q Series CPU.
• When an output-only module such as SC-A0JQIF24R is used, selecting QY41P as the programmable
controller side module changes the I/O addresses and requires program modification.
In this case, the start I/O address of the affected slots can be re-assigned in I/O assignment of Q Series CPU
parameter in order to avoid changes to the program.
• 24 V DC output power supply of the Q62P can be used as an external power supply for the A0J2 renewal
tool. However, depending on the number of modules used, an extra power supply may be needed. In this
case, prepare an external 24 V DC power supply.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
X00... X40... X80... YE0...
No. =3
No. =0
SC-A0JQBSL
(Standalone type)
Existing module
A0J2HCPU
A0J2-E56DR
A0J2-E24R
A0JC01/A0JC03
(CPU built-in power supply
is used.)
Standalone type replacement module
SC-A0JQIF56DR
SC-A0JQIF24R
SC-A0JQBSL
SC-A0JQC10M
67
2.4 Replace A0J2 with Q Series
SC-A0JQC10M (1.0 m I/O connection cable) x 7
No. =1
No. =2
SC-A0JQBSL
SC-A0JQBSL
(Standalone type)
(Standalone type)
Standalone type replacement module
Q61P
Q00UCPU
1
Q35B
N/A
3
QX41Y41P
1
QY41P
4
N/A
24 V DC power supply module
-
(Commercially available)
3
1
3
7
Cable length: 1.0 m
1
1
1
-
3
1
-
-
Remarks
Advertisement
Table of Contents
