A2C shape CC-Link remote I/O modules
CC-Link remote I/O modules are available in the same shape and size as some of the A2C I/O modules to
New mounting holes are unnecessary and existing wiring can be utilized with minor modifications.
Remove the wired
from the existing
■ Model list
Model to be discontinued
• The A2C shape CC-Link remote I/O modules can also replace MELSECNET/MINI(-S3) systems consisting
of the AJ71PT32(-S3)/A1SJ71PT32(-S3) building block type master module with CC-Link.
In this case, program modification is not required.
• For replacing compact type remote I/O modules with CC-Link modules, refer to "Section 2.6.3 Replace
MELSECNET/MINI compact type remote I/O modules with CC-Link".
• Also the CPU can be replaced with LCPU.
When it is replaced with L Series, the CC-Link master module LJ61BT11 or the built-in CC-Link function of
the LCPU will be used.
The CC-Link remote module can be connected to any of Q Series and L Series.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4.5 Replace MELSECNET/MINI(-S3) with CC-Link
After replacing the module,
mount the wired terminal block.*
Terminal block type, 24 V DC input, 32 points,
Terminal block type, 0.5 A transistor output,
32 points, sink
Terminal block type, 24 V DC input, 16 points,
0.5 A transistor output, 16 points, I/O composite module
Terminal block type, relay output, 32 points
Terminal block type, 24 V DC input, sink/source shared,
16 points, relay output, 16 points, composite module
*1: The communication lines
and power lines need to