Notes For Replacement Of Network (Melsecnet(Ii)); Cpus Compatible With Networks (Melsecnet(Ii), Melsecnet/10 And Melsecnet/H); System Configuration For Melsecnet/10 And Melsecnet/H (Plc To Plc Network) - Mitsubishi Electric Artisan MELSEC-Q Series Manual

General-purpose programmable controllers, large/small
Table of Contents

Advertisement

11.1 CPUs compatible with networks (MELSECNET(ΙΙ), MELSECNET/10 and MELSECNET/H)
11.
Notes for replacement of network (MELSECNET( II ))
11.1 CPUs compatible with networks (MELSECNET(II), MELSECNET/10 and
MELSECNET/H)
This section shows the CPU types compatible with the network (MELSECNET(II), MELSECNET/10 or
MELSECNET/H) to be configured and the combinations of CPU types.

11.1.1 System configuration for MELSECNET/10 and MELSECNET/H (PLC to PLC network)

The following table shows the CPU types that are compatible with MELSECNET/10 and
MELSECNET/H (PLC to PLC network) network systems.
Control station
MELSECNET/10 mode
MELSECNET/H mode
Q (Q Mode)
(10 Mbps)
MELSECNET/H mode
(25 Mbps)
QnA (MELSECNET/10 mode)
AnU, Q (A Mode)
(MELSECNET/10 mode)
AnA, AnN, AnS(H)*
4
*1: Cannot be mixed with a remote I/O station.
*2: Restrictions may apply to the B/W link range depending on the CPU type
AnA
AnN, AnS(H): B/W000 to 3FF
*3: CPUs other than Q Series CPU (Q mode) cannot be combined because a network system can be
configured with Q Series CPU (Q mode) only.
*4: Cannot be a control station.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Q (Q Mode)
: B/W000 to FFF
Normal station*
QnA
×
186
1
AnU,
AnA, AnN,
Q (A Mode)
AnS(H)
○*
2
×*
3
×*
3
○*
2
○*
2
○: Compatible, ×: Not compatible

Advertisement

Table of Contents
loading

Table of Contents