9.2 Create a sample program for MELSECNET(ΙΙ) or MELSECNET/B link refresh using A/QnA -> Q conversion support tool
Step 5: Save the program
Confirm the save destination for the link refresh sample program.
(a) The save destination cannot be specified by the user.
The folder name is created according to "PLC type" and "I/O number" entered in (a) and (b) of "Step 3".
(Example) When the programmable controller type is Q25H, and the I/O number is 200, the folder name
If the same folder name already exists, it is overwritten.
When creating a link refresh sample program for multiple devices that have the same
programmable controller type and I/O number, move the project to a different location, or
rename and save the created project using GX Developer.
Step 6: Complete the creation of sample program
End the operation of "A/QnA -> Q conversion support tool".
(a) Select "Exit" to end the operation of the "A/QnA -> Q conversion support tool".
The "A/QnA -> Q conversion support tool" screen will close.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com