Download  Print this page

Mitsubishi Electric Artisan MELSEC-Q Series Manual Page 151

General-purpose programmable controllers, large/small.
Hide thumbs

Advertisement

7.4 Utilize SFC programs (Replace MELSAP-ΙΙ with MELSAP3)
Procedure 2: Program settings in GX Developer
When SFC programs have been created as ACPU program file, they are replaced with the following 2
programs.
• Ladder instructions: MAIN
• SFC programs: MAIN-SFC
To execute multiple programs, such as "MAIN" and "MAIN-SFC", go to "Program" found in "Parameter" of PLC
to set the program name, execution type, and the order of execution during each scan.
(Program file name after changing programmable controller type)
* For detail operation instructions, refer to the following manual.
Transition from MELSEC-A/QnA(Large Type)Series to Q Series Handbook(Fundamentals)(L-08043ENG)
[7.7.10 Setting method when multiple sequence programs are created]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(Program settings window)
148

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric Artisan MELSEC-Q Series

Comments to this Manuals

Symbols: 0
Latest comments: