Download  Print this page

Mitsubishi Electric Artisan MELSEC-Q Series Manual Page 150

General-purpose programmable controllers, large/small.
Hide thumbs

Advertisement

(1) Operation for utilizing SFC program
Procedure 1: Changing programmable controller type in GX Developer
"Change PLC type" is a function that changes the target programmable controller type of the data being read
through GX Developer. The sequence programs are also automatically converted to comply with the target
programmable controller. However, instructions that cannot convert automatically are replaced with the
instructions shown below.
• High Performance Model QCPU: OUT SM1255
• Basic Model QCPU: OUT SM999
Search for these "OUT" instructions or SM1255/SM999 devices and manually modify the converted programs.
Additionally, intelligent function modules and network modules may require program and parameter
modifications.
(Project menu)
* For detail operation instructions, refer to the following manual.
Transition from MELSEC-A/QnA(Large Type)Series to Q Series Handbook(Fundamentals)(L-08043ENG)
[7.1.2 Changing programmable controller type]
Tip
Files in GPPQ/GPPA format, which were created/saved using SW IVD-GPPA, SW IVD/NX-GPPQ, should be
converted into GX Developer format using "Import file".
Execute "Change PLC type" after the file is imported to GX Developer.
* For detail operation instructions, refer to the following manual.
Transition from MELSEC-A/QnA(Large Type)Series to Q Series Handbook(Fundamentals)(L-08043ENG)
[7.1.4 Reading (Reusing) other format files]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7.4 Utilize SFC programs (Replace MELSAP-ΙΙ with MELSAP3)
([Change PLC type] window)
147

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric Artisan MELSEC-Q Series

Comments to this Manuals

Symbols: 0
Latest comments: