Mitsubishi Electric Artisan MELSEC-Q Series Manual page 60

Panel
mounting
DIN rail
mounting
● List of conversion adapters
Existing module
Module type
model
A1SX10
A1SX10EU
A1SX40
A1SX40-S1
A1SX40-S2
A1SX80
Input module
A1SX80-S1
A1SX80-S2
A1SX81
A1SX81-S2
A1SY10
A1SY10EU
A1SY22
A1SY40
A1SY40P
Output module
A1SY50
A1SY80
A1SY81
A1SY81EP
Analog input
A1S64AD
module
Analog output
A1S62DA
module
A1SD61
High-speed
counter module
A1SD62
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2.3 Replace AnS/QnAS (Small Type) Series with L Series
AnS/QnAS Series
Existing module wiring is used.
Existing module wiring is used.
(If the base adapter cannot be fitted, it is necessary
to change to the DIN rail mounting type.)
Existing module wiring is used.
New module Conversion adapter
model model
LX10 ERNT-ASLTXY10
ERNT-ASLTX40
LX40C6
ERNT-ASLTX80
LX41C4 ERNT-ASLCXY81
LY10R2 ERNT-ASLTXY10
LY20S6 ERNT-ASLTY22
ERNT-ASLTY40
LY40NT5P
ERNT-ASLTY50
LY40PT5P ERNT-ASLTY80
LY41PT1P ERNT-ASLCXY81
L60AD4 ERNT-ASLT64AD
L60DA4 ERNT-ASLT62DA
ERNT-ASLTD61
LD62
ERNT-ASLTD62
57
Replace
L Series
*
*
*
*
LG69
Usable
Unnecessary
Usable
Unnecessary
Usable
Usable
* Replace the terminal block
covers with those supplied
with the conversion
adapters.
* Replace the terminal block
covers with those supplied
with the conversion
adapters.
Remarks
The existing wiring can be
used.
The existing wiring can be used
by replacing the D-sub 37-pin
connector with the 40-pin
connector.
The existing wiring can be
used.
The existing wiring can be used
by replacing the D-sub 37-pin
connector with the 40-pin
connector.
The existing wiring can be
used.
The existing wiring can be
used.