9.2 Create a sample program for MELSECNET(ΙΙ) or MELSECNET/B link refresh using A/QnA -> Q conversion support tool
Step 10: Configure and write the sample program to the programmable controller CPU
Perform the following operations using GX Developer.
(a) Rename and save the sample program project.
(b) In order to use the renamed and saved sample program in the specified Q Series CPU's program file,
select "Project" -> "Copy", and paste the sample program to the "Program" of the specified Q Series CPU.
(c) Select "PLC parameter" -> "Program", and set the "Execute type" of the added program to "Scan".
(d) Write the parameters and the sequence program to the specified Q Series CPU.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com